Update! Here’s the final product on our door for the holidays!
For comedic effect, here’s the entirety of the original post:
I have been having a harder time dealing with the loss of my mom than before. I’ve retreated from teaching Zumba and cleared my schedule so that my full-time job is my only obligation. I’d like to start doing things for me. Like writing again (I took a break. Thinking hurt.) or going back to ballroom or ballet (even if it takes a drive into the city). And then, there’s DIY. Yeah, like Pinterest.
Here’s my first try at something crafty, in honor of this girl’s blog entry: a DIY nautical wreath.
First up, the ingredients or materials or whatever the technical term is. Half inch thick sisal rope. I got this one on Amazon. Scratch that. I got this one, then ran out, and needed a second. So two of these. No jute was necessary in the making of the project. Glue gun. A wreath form. Hands of steel. And patience.
Start hot gluing. To get a good foundation, I used dabs of glue at every point the rope hit on the inner circle. Don’t glue down where the rope hits on the outer circle since you’ll end up moving it around.
After finishing the first time around, I realized something from grade-school math class. The circumference of the inner circle is going to be less than the circumference of the outer circle. So while you have the rope touching all along the inner circle, it will have spaces where the wreath form is exposed on the outer circle. Which is why it was great I didn’t glue it down. Try to get each rope wrap (made that up), perpendicular to the wreath form, because otherwise it starts getting unmanageable. Then to cover those bald spaces, take the rope around a second time.
Your first pack of rope will run out if you’re anal about covering up the bald spots like me. I wanted this sucker to look substantial and heavy-duty. Of course, you could just buy 100 feet of rope, but that would be harder to manage, as you have to pull the rope through the center of the wreath with every single rope wrap. Have no fear, OCD’ers. The seam of where the two ends meet gets covered with rope.
Take some hot glue to the middle of the rope at the end so it doesn’t look so frayed. But otherwise, it’s no big deal. Start your next hunk of rope right where you left off.
I ended up going around one full time to cover as much as the base as possible, a second time to fill in the bald spots, and a random-rope-wrap-here-and-there third time to give the wreath texture and to make the loops. When you decide you’ve reached your last rope wrap, leave that one a little loose as well as the rope wrap 4-6 inches before. You’ll use these to make knots. Without even cutting the rope, make a knot at your last rope wrap. I actually looked up nautical knots and have no idea if mine was legit. But it seems sturdy. so finish the first knot, make the hanger, then repeat at the rope wrap 6 inches from the end. Have the rope exit the back so you never see it, and then chop off the rope.
I put some hot glue into the knots in hopes they’ll hold better and let it dry for a bit. I’ll be honest, the knots took me a lot longer than they should have, and I redid them several times until deciding they were done. But here is the end result! It’ll go outside once A) I have a wreath hanger and B) it has stopped torrentially raining outside – not because I’m afraid this won’t hold up, but because I’m just cold. I’ll add a photo of it on our door when it’s up!
Here are some pointers. Really, just things to look out for. Keep an eye on the animals.
No, for real. These buggers were obsessed. I imagine if you have kids, they can be distracting too.
Last word of advice: protect your hands with a thick hand cream before, during, and after. It’s basically winter in New England, the air is dry, my skin is cracking as is, and the wreath form and rope were a little painful at times. But I think the end result is worth it. Ray and I love anything nautical and like the things in our house to be more modern than not, so I think this foots the bill.